True Sine Wave Inverter " Charger

A 3000 watt true sine wave inverter combined with a 120 amp continuous duty, multi-stage battery charger.

The PROsine 3.0 Inverter/Charger is your higher power answer to meeting your AC power demands, your DC charging needs, and seamlessly transferring between both modes to meet your changing day-to-day power requirements.

A powerful solution to all your remote power needs, the PROsine 3.0 utilizes advanced high-frequency switching technology in the power conversion process. Incorporating some of the most advanced circuitry available today into the design, the PROsine 3.0 offers several benefits, including:

 Clean AC power - true sine wave output for sensitive loads

 Light weight - for ease of installation

 Totally silent - for quiet operation

 Clean DC output - filtered output for ideal battery charging

 High surge capability - for difficult AC loads

Functions of the PROsine 3.0 Inverter/Charger:

Inverter Function:

When the PROsine 3.0 Inverter/Charger is in inverter mode, it draws power from a battery and delivers a true sine wave AC output that is the same as or better than the waveform supplied by your local electric utility. In some cases, the PROsine 3.0 Inverter/Charger can deliver an even more stable waveform than your utility-supplied power due to the extensive control circuitry incorporated in the design of the unit.

Charger Function:

The"smart" charging capability of the PROsine 3.0 Inverter/Charger provides a multi-stage charge to quickly bring back deep-cycle batteries to their full charge. Using microprocessor control, the PROsine 3.0 Inverter/Charger precisely regulates the voltage and current delivered to the battery, accurately charging the battery without risk of overcharging and battery damage. Depleted batteries are taken through the recommended "Bulk", "Absorption", and "Float" stages and a manually set "Equalize" stage is available to bring flooded batteries up to their peak capacity. The charging algorithm used in the PROsine 3.0 Inverter/Charger is based on the same charge cycle algorithm used in Statpower's proven TRUECHARGE battery charger line.

Automatic Transfer Switch:

An integral 30 amp rated relay has two functions. When utility AC power fails or is disconnected from the unit, a quick 20 millisecond (maximum) transfer takes place (16 ms typically) and the PROsine 3.0 Inverter/Charger begins inverting, delivering AC power to the loads. When utility AC becomes present again, the control circuit waits for 8 seconds, during which time the unit verifies the stability of the AC source and synchronizes the inverter to the AC source for a smooth, seamless transfer. Battery charging will begin and AC is also fed through the unit to power the AC loads.

Advanced Control System (ACS) panel included with the PROsine 3.0:

The ACS Control Panel provides system control and display information via a menu driven, 6-level, multi-functional LCD panle. Detailed information and control is available for: AC information, battery status, inverter mode, charger mode, system info, and Statpower info. The deluxe ACS Remote Control Panel is included with the PROsine 3.0 Inverter/Charger unit. There's no need to pay extra for remote monitoring and control.

True Sine Wave Output (<5%THD):

A smooth, step-free waveform delivering dependable and reliable electrical power for even the most demanding and sensitive of loads.

Super-Quick Transfer:

A maximum detect and transfer time of 20 milliseconds (16 ms typically) ensures critical loads stay powered up when AC power drops away.

Multi-Stage Charger:

Can be set for either gel or flooded batteries and delivers 120 amps of charging current for quick, accurate battery charging.

99% Charger Power Factor Rating:

Allows operation from smaller generators, as the full 120 amps of charging current requires only 17 Amps of AC input power.

Full Range Operation:

Battery banks are often well below the ideal "normal" 12 Volts. To compensate for that fact, the PROsine 3.0 Inverter/Charger delivers its rated 3000 Watts continuous right down to 10.5 Volts input.

High Frequency Switching Technology:

Results in a lighter weight and compact design for ease of installation. Actual product weight - a remarkable 32 lbs.!

 

Protections

Over-temperature shutdown, Auto overload protection, Battery reverse polarity.

PROsine 2500   PROsine 1800  PROsine 1000

PROsine Home Page 

For a Current Price Please Call 352-568-7582 or 

Write us @ our Sales Dept.or Click The Sales Link

Copyrighted 5/99